|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Transmission Coolers with 12V FansFan coolers / Remote Coolers can be mounted in various locations as required.
Coolers with electric fans | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | |||||
| Fan mounted coolers | Image | Price | |||
|
#
13021
In-Line Fan Thermostat AN6 / 3/8 hose fittings
Automatic electric fan controller activates at 180+- and off at 170 +- degree For use with coolers #13700 13730 & 13750 only. Caution: Use a dab of silicone sealer on sensor thread, then HAND tighten only! Please read instruction sheet before installing |
|
$ 26.46 | |||
|
#
13730
Econo-Cool Remote Cooler & Electric Fan 11/32 hose barb inlets
6 pass cooler with a 400 CFM 7 inch Tornado Electric Fan 15,500 GVW 7 1/2 x 12 x 3 7/8 Installation kit #13022 & Thermostat #13021 sold separately. For Transmission use only. For use with 5/16" transmission cooler lines only. |
|
$ 133.59 | |||
|
#
13750
Atomic-Cool Remote Cooler & Electric Fan AN-6 Inlets
Fin & Plate cooler with a 400 CFM 8 inch Tornado Electric Fan Overall size 10 x 12 1/2 x 4 Installation kit #13022 & Thermostat #13021 sold separately. For Transmission use only. |
|
$ 203.49 | |||
|
#
13700
Electra-cool Remote Cooler & Electric Fan AN-6 inlets
16 Pass cooler with a 650 CFM 10 inch Tornado Electric Fan 25,000 GVW 10 x 16 x 4 7/8 Installation kit #13022 & Thermostat #13021 sold separately. For Transmission use only. AN6 to Hose fittings are included (taped to inside of box with the warranty card) |
|
$ 176.04 | |||
|
#
13022
Transmission Cooler re-installation kit by Derale
This kit includes both the plastic rods, metal mounting bracket, 4' of 11/32 ID cooler hose and clamps Includes special fittings for for 3/8" cooler lines. |
|
$ 31.77 | |||
| | |||||
| Fan Mounted coolers - 1/2 | Image | Price | |||
|
#
15721
In-Line Fan Thermostat for AN8 / 1/2" coolers
Automatic electric fan controller activates at approximately 180 and off at 170 degree. For use with coolers # 15800 & 15850 only. Caution: Use a dab of silicone sealer on sensor thread, then HAND tighten only! Please read instruction sheet before installing. |
|
$ 26.46 | |||
|
#
15800
Fan Mounted cooler with AN8 - 1/2" inlet
16 Pass, Tube & Fin cooler with Tornado 10" Electric Fan, 650 CFM AN8 to Hose fitting are included Rated at 25,000 GVW. Size 10 x 16 x 4 7/8 Can be used with 1/2" cooler lines found on many Dodge Cummings PU trucks. Hose & Thermostat #15721 sold separately. |
|
$ 170.89 | |||
|
#
15850
Fan Mounted cooler with AN8 - 1/2" inlet
Fin & Plate cooler, Size 10 x 13 x 4 400 CFM - 8 inch Tornado Electric Fan, 25,000 GVW + Can be used with 1/2" cooler lines found on many Dodge Cummings PU trucks. AN8 to Hose fitting are included Hose & Thermostat #15721 sold separately. |
|
$ 197.35 | |||
|
#
13008
Hose clamps (4 / bag) 5/16" to 7/8"
Stainless Steel hose clamps |
$ 2.92 | ||||
|
#
15700
Cooler Hose, 1/2" ID x 10 foot
Standard duty, High Temp hose 10' x 1/2" I.D. Can be used with # 15800 & # 15850 Fan coolers & can also be used with L7B, M7B & H7B coolers with your barb fitting |
|
$ 22.32 | |||
| | |||||
| High flow coolers with fans | Image | Price | |||
|
#
DB-343DC-12
High flow - Fan cooler 3/4" fitting, 18 x 12.75 x 6.75 overall size
On Special! - Regular price $ 410.00 Flow range 4 - 20 GPM Heat rejection range 15,100 - 19,700 BTU/Hr 12 volt fan Hoses, couplers & thermostat sold separately. |
|
$ 406.82 | |||
|
#
DB-345DC-12
High flow - Fan cooler 3/4" fitting, 24 x 19 x 6.7 5 overall size
Flow range 5 - 21 GPM Heat rejection range 22,900 - 31,100 BTU/Hr 12 volt fan Hoses, couplers & thermostat sold separately. |
|
$ 528.10 | |||
|
#
DB-341DC-12
High flow - Fan cooler 1" fitting, 24 x 19 x 6.75 overall size
Flow range 5 - 30 GPM Heat rejection range 22,700 - 33,000 BTU/Hr 12 volt fan Hoses, couplers & thermostat sold separately. |
|
$ 528.10 | |||
|
#
DB-515-B
Mounting kit for High Flow Tube cooler (1 kit = 2 mounts)
Order as many needed! 2 rubber mounts, 2 brackets & 2 bolts. Isolates cooler from vibration and offers a secure mount. Special elastomer block installs in header holes (side tubes) and expands when tightened, for a secure hold. |
|
$ 4.68 | |||
|
#
DB-TCF180
In-line fan thermostat - activates at 180 +-
Screws in to a "T fitting" (customer supplied) in the Inlet side of the Fan Cooler. 1/2" pipe thread on unit. For DB High flow fan coolers only! |
|
$ 51.27 | |||
Credit Card Declined |
Warranty Policy |
Return Policy |
APO/FPO Shipping
Order Tracking |
Industry Links
Contact Us
